The Aqua Aura Process as given by the processor DIRECTLY to me, I have known the owner since 1990 and speak to him regularly; so this is from the HORSE’S MOUTH.

The Aqua Aura Process and all of the other Aura Crystal they produce are done with a heat and vacuum process; the Crystals or Stones are heated to 1000 F or more depending on what each stone is, and at the same time a vacuum is applied and all excess moisture is removed from the Crystal or Stone so the metal goes INSIDE of the stone not just on the surface of it. 

Once that is done, then rare or precious metal that have been vaporized into a gas are released into the chamber; with the missing moisture the metals slide right into the lattice of the Crystal or Stone, going in a few microns and becoming permanently bonded inside of the Crystal or Stones.

The Metals used are Aqua Aura is Gold, Angle or Opal Aura is Platinum and Silver, Solar or Melon Aura is Organic Iron, Tanzan Aura is Indium. Again this is from the people who make them, so the confusion and misrepresentation of these stones might be cleared up. They vaporize their own metals so purity is constant and quality is High.

THEY DO NOT MAKE THE OTHER COLORS, they are cold Process's

and many of them COME OFF at a later date; so just because it is called an AURA Crystal does not mean that it is one, it is all on the Surface of the Crystal or Stone NOT INSIDE OF IT!

 Solar Christ and Christ Commune Aura crystals are a part of the BRAND NEW Two Tone Aura™ Group of Crystals, they are processed twice in the heat and vacuum chamber; then they are activated in a number of process’s that awaken them and program them, with out the 2nd process’s being done you have a much less alive Crystal.

Be The LIGHT----it is cheaper than buying a lamp!TM

Larry Coyote